 |
DUST
COLLECTORS
Manufacturers,
Exporters & Suppliers of all kinds of Dust
Collectors... |
| |
 |
Dust
Collectors |
|
|
|
Model No. - DC -1 -1-100
|
Model
No. - DC -1.5 -2-100s |
Model No. - DC -2 -2-100 |
| |
|
|
|
"POWER
MASTER" Dust Collectors are the
requirements of today for Pollution Control.
These Dust Collectors are specially designed for
Collection of dry ferrous dust generated from
Grinding process, such as Surface Grinders, Profile
Grinders, Off Hand Grinders & Belt Grinders
etc. Low Noise : Below allowable noise level.
High Filtering efficiency even for the finest
dusts.
Total Security with : Cotton filtering sleeves
(Non-inflammable)
Energy Savings : Low power consumption.
Standard Accessory : Suction Inlet mounted on
adjustable Arm.
Optional Accessory : Water Dust Separator for
Aluminum Dust.
Dust Collectors available for various applications.
Efficiency:
The Effectiveness of any type of Dust Collector
depends on a number of factors such as design
of Suction Inlet, proximity of Suction Inlet to
the point of Dust generation and Suction in the
direction of dust generation.The Suction Capacity
of the Dust Collector viz 1,2,3 HP as required.
The efficiency available on Dust Collectors is
50 to 60% normally.
Technical Specifications |
Model |
DC-0.5-1-73 |
DC-1-1-100 |
DC-1.5-2-100 |
DC-2-2-100 |
Motor |
0.5
HP 3 PH |
1
HP 3 PH |
1.5
HP 3 PH |
2
HP 3 PH |
CFM |
190 |
380 |
550 |
1070 |
Cap.
Dust Drawer |
0.02
M cube |
0.03
M cube |
1.5
HP |
0.10
M cube |
Suction
Inlet |
1
x 73 mm OD |
1
x 100 mm OD |
2
x 100 mm OD |
2
x 100 mm OD |
Electricals |
Terminal
block for input supply |
Terminal
block for input supply |
Terminal
block for input supply |
Terminal
block for input supply |
Shaker |
Manual |
Manual |
Manual |
Manual |
Over
all Dim. |
L
x W x H
475 x 650 x 850 |
L
x W x H
540 x 750 x 990 |
L
x W x H
700 x 750 x 1100 |
L
x W x H
700 x 750 x 1500 |
Nett
Weight |
45
KG. |
75
KG. |
100
KG. |
130
KG. |
NOTE: Accessories are shown in
this picture are not a part of standard machines. |
|
| |
|
Bench
Grinder with Built in Dust Collectors |
|
|
Model No. - 1678 - 0.75 - 2
Manufactured by "Prem Brothers" Since 1959
|
"POWER
MASTER" Bench Grinders with Built in Dust
Collectors are specially designed for Collection of
dust generated during Grinding Process.
Features
1) Bench Grinding Machine mounted on Rigid steel Frame.
2) Low Noise : Below allowable noise level.
3) High Filtering efficiency even for the finest dusts.
4) Total Security with : Cotton Filtering sleeves (Non-
inflammable)
5) Energy Savings : Low power consumption.
Technical
Specifications
Grinder
Motor |
0.55
KW , 0.75 HP, 3 Phase , 2800 RPM |
Wheel
Size |
200
x 25 x 31.75 mm (8") |
Dust
Collector Motor |
0.37
K W, 0.5 HP, 3 Phase |
CFM |
190 |
Shaker |
Manual |
Over
all Dim : |
L
x W x H - 650 x 650 x 1050 |
Approx.
Weight |
180
Kg. |
|
| |
| |
|
Belt
Grinder with Built in Dust Collectors (Single
Ended) |
|
|
Model No. - 648 - 0.5 - 1 - 100
Manufactured by "Prem Brothers" Since 1959
|
"POWER
MASTER" Belt
Grinders with Built in Dust Collectors are specially
designed for Collection of dry generated during Grinding
of Components.
Features
1) Belt Grinding Machine mounted on Rigid steel
Frame.
2) Low Noise : Below allowable noise level.
3) High Filtering efficiency even for the finest dusts.
4) Total Security with : Cotton Filtering sleeves
(Non-inflammable)
5) Energy Savings : Low power consumption.
Technical
Specifications
Belt
Grinder Drive |
1.5
KW, 2.0 HP, 3 Phase, 2800 RPM |
Wheel
size |
200
x 50 mm |
Dust
Collectors Motor |
0.37
K W , 0.5 HP , 3 Phase |
CFM |
180 |
Suction
Inlet |
1
x 100 mm OD |
Shaker
|
Manual |
Electricals |
Rotary
Switch |
Over
all Dim. |
L
x W x H - 900 x 750 x 1750 |
Approx
. Weight |
200
Kg. |
|
| |
| |
|
Double
Ended Belt
Grinding Machine with Dust collector |
|
|
 Manufactured
by "Prem Brothers" Since 1959 |
|
| |
|
Double Ended Belt Grinding Machine with
Full Guard and Seperate Dust Collector |
|
|
Model No. - 322
Manufactured by "Prem Brothers" Since 1959
|
|
| |
|
Dust
Collector for Three Polishing Machines |
|
|
 Manufactured
by "Prem Brothers" Since 1959 |
|
| |
|
Polishing
Machine with Built in Dust Collectors |
|
|
Model No. - BIDC - 322
Manufactured by "Prem Brothers" Since 1959
|
"POWER
MASTER" These
Machines are specially designed for the purpose of Controlling
Dust. Here the Polishing Machine is mounted on a Steel
Body with an in-built Dust Collector making the machine
compact and inexpensive.
Features :
Polishing Machine Details : -
Polishing Head - 2.2 KW / 3 H.P / 3 PH. 2800
RPM.
Buff Guards - 2 Nos. As per job requirement.
Electricals - Dol Starters
Dust Collectors Details : -
Electric Motor 1.5 KW / 2 HP
Dust Tray ( At the bottom of the steels frame)
Filters - Removable - 2 Nos.
Filter Bag- 1 No.
Overall Dimensions Apprx. L-1500 x W-950 x H-1350
Approximate Weight - 250 K.G. |
| |
|
Double
Ended Belt Grinding Machine with Built in Dust
Collectors |
|
|
Model
- 222/2000-2-100
Manufactured by "Prem Brothers" Since 1959
|
Features
1. Compact unit ergonomically designed and space saving.
2. Belt Grinding machines with built in Dust Collector
3. Machine for standing height working
4. Low Noise : Below allowable noise level with built
in noise suppressor
5. High filtering efficiency even for fine dust particles
6. Energy Saving : Low power consumption
Technical
Specifications
Belt
Grinder Drive |
2.2
KW, 3.0 HP, 3 Phase, 2800 RPM |
Wheel
size |
200
x 50 mm x 2 Nos |
| Belt
Size |
50
x 2000 mm |
Dust
Collectors Motor |
1.10
K W , 1.5 HP , 3 Phase, 2800 RPM |
CFM |
180 |
Suction
Inlet |
2
x 100 mm OD |
Electricals |
Rotary
Switch |
Over
all Dim. |
L
x W x H
900 x 750 x 1750 |
Approx
. Weight |
250
Kg. |
Model |
222/2000-2-100 |
|
| |
| |
|
Dust
Collector Multiple Inlet |
|
|
Model No. - DC 3-3-200
Manufactured by "Prem Brothers" Since 1959
|
|
| |
|
Bench Grinder with Built in Dust Collector
(with Control Panel) |
|
|
Model No. - BIDC 101-2-73
Manufactured by "Prem Brothers" Since 1959
|
|
| |
|
Grinding
Machines for Spectrometry Purposes / Laboratory
Applications |
|
|
Model No. - 1678-03-0
Manufactured by "Prem Brothers" Since 1959
|
|
| |
|
Parts
and Accessories of Dust Collectors |
|
|
Buff
Guards for polishing machines
Manufactured by "Prem Brothers" Since 1959
Standalone Dust Guards available as per customer job requirement,
center height 24", 36" or as required. Photograph
of Buff Guards of center height 24"
|
Dust
Guards for Belt Grinding Machines
Manufactured by "Prem Brothers" Since 1959
Standalone Dust Guards available for Single Ended and
Double Ended or as required.
Model No. - Center Height 24" |
| |
| Wide
range of Machines available to suit different job requirements |
| NOTE:
We reserve the right to change. |
| Due
to constant improvement, techincal specifications and
dimensions are subjects to modification without prior
notice. |
